Whirlpool Accessories

These seats are designed for use inside the tank for low back, hip and leg treatment. Two side brackets with four levels of adjustments (three levels for the -AS3) are provided, along with an adjustable removable seat.The seats are fabricated entirely...

These seats are designed for use inside the tank for low back, hip and leg treatment. Two side brackets with four levels of adjustments (three levels for the -AS3) are provided, along with an adjustable removable seat.The seats are fabricated entirely...

These seats are designed for use inside the tank for low back, hip and leg treatment. Two side brackets with four levels of adjustments (three levels for the -AS3) are provided, along with an adjustable removable seat.The seats are fabricated entirely...

Designed for use with the whirlpool tank for treatment of lower extremities. The seat is 12" wide and extends around the front and sides of the tank.

Designed for use with the whirlpool tank for treatment of lower extremities. The seat is 12" wide and extends around the front and sides of the tank.

This option when installed on the discharge side of the Thermostatic Mixing Valve (-MXT) aids in tank clean up. It consists of a tee fitting, shut off/volume control valve, vacuum breaker, a 9 foot hose with a spray nozzle and a wall-mounted hose...

This head rest is used in Lo-Boy whirlpools or Full Body Immersion Tanks to support the patient's head during treatment. It is fabricated from stainless steel tubing with a cover.

Four 3" swivel casters, two with locks. Safety belt. Height adjusts from 33" to 46-1/2". 14" x 19" non-slip rubber foot platform. Seat 18" x 20", back 10" x 16".

With safety belt. Height adjusts from 29-1/2" to 43-1/2". 14" x 19" non-slip rubber foot platform. Seat 18" x 20", back 10" x 16".

Four 3" swivel casters, two with locks. Height adjusts from 22-1/2" to 28-1/2". Seat 18" x 20", back 10" x 16".

Height adjusts from 19-1/2" to 25-1/2". Seat 18" x 20", back 10" x 16".

This seat is recommended for use with Lo-Boy whirlpools to provide comfort to the patient. The seat is fabricated from stainless steel and polished to a satin finish.

The rubber hand grips are designed to snap on to the rim of a whirlpool tank and are made from cylindrical rubber, 1-1/2" in diameter and 6" long.

Rim height seat for lower extremity treatments; side benches for hand/arm treatments from either side of tank

Rim height seat for lower extremity treatments; side benches for hand/arm treatments from either side of tank

Rim height seat for lower extremity treatments; side benches for hand/arm treatments from either side of tank

This arm rest is used for supporting the arms or hands on either side of the whirlpool tank. It is fabricated entirely from Type 304 stainless steel and polished to a satin finish.

These valves are designed to control the mixing of hot and cold water and deliver it at a constant, pre-set temperature. The valve is equipped with a union end, loose key, angle stop, check valves with built-in strainers and vacuum breaker; Control valve...